FORUMS

    Channels  Hop To Forum Categories  Discovery Shed  Hop To Forums  DIY    Share your funniest DIY disasters
Go
New
Find
Notify
Tools
Reply
-star Rating Rate It!  Login/Join 
<The Editorial Team>
Posted
If you have a story about a bit of DIY that went wrong - for you or someone you know - we want to hear about it!
 
Reply With QuoteEdit or Delete MessageReport This Post
Crew member
Posted Hide Post
It should have been the center column of a round table.... 2ft x 10in x 10in... half way into the turning, the card board template flow off the back of the lathe!!!!!! picking it up, re placing it as it had been!!!!! continued turning... only to find the new shape was WRONG!!!!!!!!!!!! Frowner Eeker had only gone an replaced the template the wrong way round... costly!!!!!!!!! something check and recheck, every time, not to do again..

Happy DIY. David
 
Posts: 2 | Location (where you live): UNITED KINGDOM | Registered: 23 March 2009Reply With QuoteEdit or Delete MessageReport This Post
Crew member
Posted Hide Post
As most of the programs on the shed channel are about fishing why bother asking this question?
 
Posts: 5 | Location (where you live): UNITED KINGDOM | Registered: 21 June 2009Reply With QuoteEdit or Delete MessageReport This Post
Crew member
Posted Hide Post
Everyone's road of DIY if full of failure and joy.But that's the key points we like it so much.

This message has been edited. Last edited by: Moderator,
 
Posts: 18 | Location (where you live): CHINA | Registered: 19 June 2009Reply With QuoteEdit or Delete MessageReport This Post
Crew member
Posted Hide Post
Of course!We are exciting about the progress of the DIY,although what we get it failfure at the end.

This message has been edited. Last edited by: Moderator,
 
Posts: 18 | Location (where you live): CHINA | Registered: 19 June 2009Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community  

    Channels  Hop To Forum Categories  Discovery Shed  Hop To Forums  DIY    Share your funniest DIY disasters


Discovery Networks Europe is not responsible for views expressed by the public or content of any external sites referenced.